Industrial Supplies
- Nicholson Slim Taper File, 6 (NCH14224M)
- Single-cut, triangular-shaped file.
- Designed for filing saws with 60° angle teeth.
- Edges set and cut for filing gullets between saw teeth.
- Includes one file.
More Details - Nicholson Machinist's Boxed Round File, Bastard File, 8 Long (NCH11904)
- Smoothes out circular openings and concave surfaces.
- Designed for use on most metals.
More Details - Nicholson Machinist's Boxed Round File, Bastard File, 14 Long (NCH12248)
- Smoothes out circular openings and concave surfaces.
- Designed for use on most metals.
More Details - Nicholson Magicut American Pattern Rectangular Machinists' Flat File, 10 (NCH07917)
- Tapered point in width.
- File features a pattern if narrow chip breakers created by steep and angled serrations for rapid removal and smoother finish.
More Details - Nicholson Magicut American Pattern Rectangular Machinists' Flat File, 12 (NCH07941)
- Tapered point in width.
- File features a pattern if narrow chip breakers created by steep and angled serrations for rapid removal and smoother finish.
More Details - Nicholson Solid Flexible Carbon Steel Hacksaw Blade, Bi-Metal, 12, 18TPI (NCH63145)
- Tempered to provide hard edge with flexible back.
- Specially hardened to induce toughness.
- Economy blade for sawing light to medium-hard materials.
- A good balance of wear resistance and mechanical shock absorbing properties.
- Virtually unbreakable.
More Details - Nicholson American Pattern Rectangular Plain 1/2-Horse Rasp File, 14in (NCH17903N)
- This thin fine-toothed rasp for shoeing racetrack riding horses and ponies.
- Plain horse rasps are double-ended with rasp teeth on 1 side.
- File teeth on opposite side.
More Details - Nicholson Rectangular Machinists' Boxed Flat File, 16 Bastard Cut (NCH03980)
- Used by machinists, machinery builders, ship and engine builders, repairmen, and others who require rapid removal of metal.
- Rectangular in cross section and taper slightly towards point in width.
- Double-cut on sides, single-cut on edges.
More Details - Nicholson Rectangular Machinist's Boxed Flat File, 12 (NCH03830)
- Used by machinists, machinery builders, ship and engine builders, repairmen, and others who require rapid removal of metal.
- Rectangular in cross section and taper slightly towards point in width.
- Double-cut on sides, single-cut on edges.
More Details - Nicholson Rectangular Machinists' Boxed Mill File, 14 (NCH08894)
- Used for sharpening mill or circular saws.
- Also for draw-filing and finishing metals.
- 2 square edges.
- All sizes taper slightly in width.
More Details - Nicholson Rectangular Machinists' Boxed Mill File, 4 (NCH08306)
- Used for sharpening mill or circular saws.
- Also for draw-filing and finishing metals.
- 2 square edges.
- All sizes taper slightly in width.
More Details - Nicholson Machinists' Boxed Square File, 10 Bastard Cut (NCH13196)
- Used for slots, keyways, and general surface filing.
- Tapered slightly towards point.
- Larger sizes frequently preferred to corresponding flat files because of heavier section and 4 filing surfaces.
More Details - Nicholson Machinists' Boxed Half-Round File, 10, 2nd Cut (NCH05026N)
- Used on concave, cinvex and flat surfaces.
- Rounded on 1 side, flat on opposite.
- Backs of all half-round bastard files are double-cut.
- Backs of all 4 and 6" files are single-cut.
- Backs of all half-round second-cut files are longer than 6" are double-cut.
More Details - Nicholson Machinists' Boxed Half-Round File, 12, 2nd Cut (NCH05125N)
- Used on concave, cinvex and flat surfaces.
- Rounded on 1 side, flat on opposite.
- Backs of all half-round bastard files are double-cut.
- Backs of all 4 and 6" files are single-cut.
- Backs of all half-round second-cut files are longer than 6" are double-cut.
More Details - Nicholson Machinists' Carded Half-Round File, 12 (NCH05090N)
- Used on concave, cinvex and flat surfaces.
- Rounded on 1 side, flat on opposite.
- Backs of all half-round bastard files are double-cut.
- Backs of all half-round second-cut files longer than 6" are double-cut.
- Backs of all 4 and 6" files are single-cut.
- Flat sides of all half-round files are double-cut.
More Details - Nicholson Machinist's Half-Round Bastard-Cut File, 6in (NCH04795NN)
- Used on concave, convex and flat surfaces.
- Rounded on 1 side, flat on opposite.
- Backs of all half-round bastard files are double-cut.
- Backs of all 4 and 6" files are single-cut.
- Backs of all half-round second-cut files are longer than 6" are double-cut.
More Details - Nicholson Machinist's Boxed Half-Round File, 12in (NCH05158N)
- Used on concave, convex and flat surfaces.
- Rounded on 1 side, flat on opposite.
- Backs of all half-round bastard files are double-cut.
- Backs of all 4 and 6" files are single-cut.
- Backs of all half-round second-cut files are longer than 6" are double-cut.
More Details - Nicholson Machinist's Boxed Half-Round File, 10in (NCH05059N)
- Used on concave, convex and flat surfaces.
- Rounded on 1 side, flat on opposite.
- Backs of all half-round bastard files are double-cut.
- Backs of all 4 and 6" files are single-cut.
- Backs of all half-round second-cut files are longer than 6" are double-cut.
More Details - Nicholson Machinist's Boxed Half-Round File, 16in (NCH05307N)
- Used on concave, convex and flat surfaces.
- Rounded on 1 side, flat on opposite.
- Backs of all half-round bastard files are double-cut.
- Backs of all 4 and 6" files are single-cut.
- Backs of all half-round second-cut files are longer than 6" are double-cut.
More Details